Supreme Mag-Drive - MD-36 (3600 gph Pump)
The Supreme® Aqua-Mag® Pumps are best suited for the demands of an aquarium or sump system but works perfectly as well in hydroponics, aquaponics, statuary and pond uses. Magnetic drive pumps are made to run continuously, without seals to wear out with an energy efficient design! Being filled with epoxy, not oil, they cannot leak oil into the pond. These are the proven and trusted pumps of the industry. These pumps have been on the market for more than 15 years.
Details:
- For use in aquariums, sumps and ponds
- Fish-safe because no oil is used
- Use with Fresh or Salt Water
- Ceramic shaft
- Continuous duty operation
- User replaceable Parts
- Thermally Protected
- Horizontal or Vertical operation
- Includes Free - Reusable Rigid Plastic Pre-filter for maximum flow
- 10ft power cord with grounded plug
- c UL us LISTED
- Can be operated submersible or in-line (below water level)
- 1" MPT Discharge and 1" FPT Intake (Minimum 1-1/2" ID Tubing should be used for maximum flow - adapters will be required)
- 5 Year Limited Manufacturer's Warranty (1 Year on Impeller assembly)
Pump Selection Guide:
Supreme Aqua-Mag Model 36 - #02745 |
|
Max Pumping Height / Shut-off: | 22ft 6in |
Max Watts / Amps | 3.3 / 369 |
Cord Length | 10ft |
Volts/hZ | 115 / 60 |
Dimensions: (L x W x H) Approx. | 7.75 x 4.00 x 6 (does not include fittings, cord, plastic pre-filter) |
Pumping Capacity | |||||||
@ 1' | @ 3' | @ 5' | @ 7' | @ 10' | @ 15' | ||
3600 gph | 2775 gph | 2595 gph | 2365 gph | 2170 gph | 1615 gph | ||
To obtain maximum flow rates - use a minimum of 1-1/2" inside diameter tubing |